Welcome to Applied Systems Northwest

Applied Systems is pleased to announce that Clearwater has hired ASNW to represent their products in Oregon and SW Washington. Clearwater enters ASNW into the water treatment business with a distinct competitive advantage over many "alternative" and traditional systems. A Clearwater system qualifies for a LEED point all by itself, and is a simple product to install in the piping systems.

www.clearwater-dolphin.com

Prevents Mineral Scale Buildup · Controls Bacteria · Inhibits Corrosion

Operating Principle. The Dolphin produces a pulsed, time-varying, induced field inside a PVC pipe that is fit conveniently into the cooling tower's recirculating water system. The electric signal changes the way minerals in the water precipitate, totally avoiding hard-lime scale by instead producing a non-sticking mineral powder in the bulk water. This powder is readily filterable and mostly removed during normal blowdown, or it settles loosely in the cooling tower basin for easy annual removal. Bacteria are incorporated into this mineral powder and therefore leave the system by blowdown, filtration, or settling. The encapsulated bacteria cannot reproduce, thus resulting in an exceedingly low bacteria population. Water softening is not necessary with Dolphin treatment, and high cycles of concentration are usually obtainable, leading to significant water conservation.

Applied Systems welcome Clearwater-Dolphin to the Applied Systems sales team.

Wow, Didn't you hear?

A Fortune 500 company located in Oregon has been retrofitting their campus with the Dolphin Systems for the past 2 years. In June 2007, two of their systems tested at 14 and 135 CFU/ml!!! Traditional chemicals companies try to maintain CFu/ml between 20,000-50,000. Which cooling tower do you want to climb into?

The client is extremely pleased with the performance and a 100% reduction in chemical usage for their cooling towers, as well as make up water and sewer charges.

Contact ASNW now, click on the name to enter email page

Applied Systems NW Inc presents the information herein to be accurate at the time of viewing. The information is offered as advice, and is not offered as professional design consultation service. The data presented here may be updated or superseded at any time, and without notice. We encourage all viewers to utilize a professional mechanical engineer and qualified contractor to perform a complete analysis of each project, examining all project specific variables. This site is intended for informational purposes only and the opinions and statements expressed herein are those of Applied Systems NW Inc, and may not reflect the opinions of our vendors, professional engineers, mechanical contractors or code officials. Please contact Applied Systems NW Inc if you have questions or comments about this site, or our products. Applied Systems NW Inc is manufacturers representative serving the Pacific Northwest region, and may not be able to directly assist those outside our region. We are pleased to forward you to the appropriate party in your respective region.